Skip to main content

Memorials

My family has fought in more than one more war.

It's not something though the men who did spoke much about.

These past World Wars, when I think about them, I think to myself, how much do we know about the real reasons behind them?

How much don't we know?

I should read through the histories a little more perhaps, and try to sift through to find original sources rather than commentaries.

But there's there's a lot to do in this life, don't know how much time I have for it.

But there's an earlier war I might read a book on soon, as I'm thinking of getting it as a gift. But that goes back a bit to the Civil War. I'll see.

Remembering my grandfather and great grandfather.

I shall have to go and walk to the graveyard before too much longer, God willing. It's not far to go to see.

Comments

Popular posts from this blog

Midway through Installing Touchkeys on the FP-90

The testing phase complete, I have begun the installation.

Before I detail that I'll talk about the testing phase.

In the testing phase, all the boards and sensors are hooked up in the proper order, and plugged into the USB connector on the computer, to be powered up and tested through the software.

I laid mine out on poster board, which proved convenient as it was strong enough to hold the laid out sensors, and convenient to move them to other locations out of the way, as I lack a lot of free surface space at this time.


The testing phase went well save for one hitch, in which the last board's sensors would only function once in a blue moon.

After some helpful advice from Dr. McPherson, and reading about previous installations on the Touchkeys group, the most probable cause for this appeared to be a lack of sufficient power from the USB port.

I spent a good deal of time fiddling around with possible solutions -- plugging the USB cable into all sorts of ports, and failing at s…

Fawns in the Rain

The fawns which visited not too long ago returned during the rains the other day.

There's flooding down by the river, but I am on a safe incline. I hope and pray the poor folks down by the river come out of it all without harm.

Finishing the Touchkeys Installation on the FP-90

Installing the Touchkeys sensor proceeds apace.


There are 88 to install, so I tune out a bit, balancing attention and daydreaming about composing better pieces than certain famous composers.

Eventually they're all done, and I am pleased with how properly placed they are.



I then begin pondering what occupied my attention last night.





Last night I removed the metal struts used as supports for the middle of the case. I have no plans to sit on my keyboard, so they should prove unnecessary. Hopefully there should be no issues.

In any case, the struts were severely in the way, and now they are gone. I will use the first pair of blocks of wood now that were too wide when they were there. I've decided to screw the wood in from the bottom to secure it, as my thinner plank proved not to adhere with hot glue.

I paint the planks too, as they were a little rough. After waiting for the paint to dry. . .

Mark two screw hole points on the wooden bridge, drill two holes, attach it to the keybo…